We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
HDbitT 4K HDMI Over IP CAT5e/6 Extender - 395ft (120m) (HDbitT4Kv2)
gofanco® HDMI CAT5e/6 Extender 4K – 120m extends HDMI audio/video signals over one cost effective CAT5e/6 cable, while maintaining signal strength and superior audio/video quality. HDMI signal transmission can be delivered directly with 1-to-1 connection or with existing network Gigabit routers or switches. With HDBitT® transport protocol, you can connect up to 30 Receivers per Transmitter to not only extend but split HDMI signals to multiple displays.
Discontinued
SKU
HDbitT4Kv2
$169.99
- Buy 10 for $159.79 each and save 6%
- Buy 15 for $154.69 each and save 9%
- Buy 25 for $149.59 each and save 12%
- OVER LAN DISTRIBUTION with MULTIPLE DISPLAYS: Direct 1-to-1 connection or 1-to-multiple through unmanaged Gigabit network routers or switches. You can connect up to 30 Receivers per Transmitter to not only extend but split HDMI signals to multiple displays. Additional Receivers (HDbitT4K-RX) are sold separately
- 395FT HDMI EXTENSION with EXISTING network setup: With a single Cat6/6a/7 cable, you can easily extend HDMI audio/video signals for up to 395ft. Connect your HDMI source device to the Transmitter, utilize existing Ethernet structure in your house/office to connect the transmitter to Receiver, then connect your HDTV from a remote location to the Receiver with an HDMI cable. * Unmanaged dedicated Gigabit switches are recommended
- HDMI 2.0 VIDEO: Supports up to 4K 60Hz UHD resolution; Auto adjustment for different cable lengths to produce the best video/audio experience. Supports 2-channel Stereo Audio
- IR Extension – Control your HDMI source device remotely; With the included IR cables, you can control your source device from a long distance, typically where the HDTV is located
- SIMPLE INSTALLATION - No driver required; Sturdy metal enclosure provides durability and minimizes EMI/RFI noise interference. FCC, CE & RoHS compliant. Our products are backed with a 1-year limited warranty and experienced tech support team in Silicon Valley. Contact us at here if you have any questions or concerns
gofanco® HDMI CAT5e/6 Extender 4K – 120m extends HDMI audio/video signals over one cost effective CAT5e/6 cable, while maintaining signal strength and superior audio/video quality. HDMI signal transmission can be delivered directly with 1-to-1 connection or with existing network Gigabit routers or switches. With HDBitT® transport protocol, you can connect up to 30 Receivers per Transmitter to not only extend but split HDMI signals to multiple displays.
Notes:
- A good quality CAT6/6a/7 cable is essential in delivering quality content.
- Network setup with multiple Receivers requires unmanaged Gigabit Ethernet switches for best performance. Dedicated unmanaged Gigabit Ethernet switches are recommended
- This package comes with one Transmitter and one Receiver. For one Transmitter to multiple Receivers setup over the network, 4K Receiver(s) can be purchased separately
Specifications
- Video resolutions: Up to 4K @60Hz
- Audio support: Digital stereo audio
- Transmission range: 4K @60Hz up to 394ft (120m)
- Transport protocol: HDBitT
- HDMI 2.0 and HDCP 2.2 compliant
- Network cable: UTP/STP CAT6/6a/7
- 3.5mm connector: IR Blaster (TX); IR Receiver (RX)
- Housing: Metal
- Power supply: 5V/3A DC
- Power consumption: < 8 watts (TX); < 10 watts (RX)
- Operation temperature: 32 ~ 122° F
- Country of origin: China
- Regulatory approvals: FCC, CE, RoHS
What's in the Package
- HDMI HDBitT CAT6 Extender 4K – 120m Kit (Transmitter & Receiver units)
- IR TX cable
- IR RX cable
- Power adapters (2)
- User’s guide
Warranty & Support
- Limited One-Year Warranty and Lifetime Product Support
| SKU | HDbitT4Kv2 |
|---|---|
| Max Resolution/Refresh Rate | 4K@60Hz |
| Max Distance | 395 ft / 120 m |
| Transmission Method | Ethernet/CATx |
| Input x Output | One-to-One, One-to-Many |
| Features | 3D |
| Compliance | HDMI 2.0, HDCP 2.2 |
Write Your Own Review
Customer Questions
hello. i have just purchased 2 extenders for 2 cable boxes and tvs. the tvs are in separate rooms, the cable boxes are side-by-side in a utility room. i am using the IR, and when i change the channel in one room, the other cablebox/tv also changes to that command. what can i do to isolate the IRs without moving the cable boxes. thanks in advance. Mike
Because the same remote works for both cable boxes, the signal from the IR blaster actually crosses over to the next cable box. The only way to fix this is to move the cable boxes farther away from each other and perhaps create a divider between these...
|
General & Standards | |
|---|---|
|
Features |
- Video resolutions: Up to 4K @60Hz - Audio support: Digital stereo audio - Transport protocol: HDBitT - HDMI 2.0 and HDCP 2.2 compliant - Network cable: UTP/STP CAT6/6a/7 - 3.5mm connector: IR Blaster (TX); IR Receiver (RX) - Housing: Metal - Power supply: 5V/3A DC - Power consumption: < 8 watts (TX); < 10 watts (RX) - Operation temperature: 32 ~ 122° F - Country of origin: China - Regulatory approvals: FCC, CE, RoHS
|
|
Warranty Information | |
|
Warranty |
Limited One-Year Warranty and Lifetime Product Support |
|
Product Measurements | |
|
Dimensions (W x H x D) |
TX,RX: 4.06″(W) x 1.10″(H) x 3.82″(D) |
|
Weight |
1.13 lbs |
|
Housing Material |
Metal |
|
Environmental Conditions | |
|
Operating Temperature |
32° to 104° F (10° to 40° C) |
|
Storage Temperature |
-4° to 158° F (-10° to 60° C) |
|
Relative Humidity |
20% ~ 90% (operating) |
|
Certifications | |
|
FCC, CE, RoHS |
|
|
Country of origin | |
|
China |
|
Related Products
1080p HDMI CAT5e/6 Extender Over IP with Loopout-120m (HDbitTPRO v2.0)
Now Only $99.88 Regular Price $119.99
